CDCKV - CYCOM 919 STRUCTURAL RESIN

Export as PDF
Product Identification

Product ID:CYCOM 919 STRUCTURAL RESIN
MSDS Date:12/17/1993
FSC:8305
NIIN:01-271-8068
MSDS Number: CDCKV

Responsible Party
AMERICAN CYANAMID CO CYTEC INDUSTRIES DIV
5 GARRET MOUNTAIN PLZ
WEST PATERSON, NJ 07424-5000
US

Emergency Phone: 201-357-3100/201-652-6013

Info Phone: 201-357-3100/201-652-6013

Cage: 83289

Contractor
AMERICAN CYANAMID CO CYTEC INDUSTRIES DIV CHEMICAL LIGHT
LITTLE FALLS, NJ 07424 US

Telephone: 201-831-2000/201-357-3100

Cage: 83289

Ingredients

FIBERGLASS

Fraction By Weight: 0-70%

ACGIH TLV: 10 MG/CUM


ALIPHATIC POLYGLYCIDYL ETHER *96-4*

CAS: 26142-30-3

Fraction By Weight: 15-40%


GRAPHITE

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: 0-70%

OSHA PEL 10 MG/CUM

ACGIH TLV: 2 MG/CUM RESP IC


ELASTOMER MODIFIED POLYAROMATIC ETHER W/HALOGENATED

Fraction By Weight: 30-60%


0.0 LBS/GAL

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED/REPEATED SKIN CONTACT
W/EPOXY RESINS MAY CAUSE ALLERGIC REACTIONS & IRRITATION.
OVEREXPOSURE TO VAPOR DURING HEAT CURING MAY CAUSE
IRRITATION/INJURY OF RESPIRATORY TRACT & EYE IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.

First Aid

First Aid:SKIN: IMMEDIATELY WASH AFFECTED AREAS W/SOAP & PLENTY OF
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Extinguishing Media:WATER, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR SCBA IN POSITIVE PRESSURE & FULL
FIREFIGHTING PROTECTIVE CLOTHING.

Accidental Release

Spill Release Procedures:WEAR NIOSH APPROVED POSITIVE PRESSURE SCBA
WHERE EXPOSURE LEVEL IS UNKNOWN. WEAR NIOSH APPROVED RESPIRATOR
SUITABLE FOR EXPOSURE LEVEL WHEN KNOWN. WEAR PROTECTIVE CLOTHING.
SWEEP UP & PLACE IN A WASTE DISPOSAL CONTAINER. FLUSH AREA
W/WATER.

Handling

Handling and Storage Precautions:AVOID PROLONGED/REPEATED SKIN CONTACT.
DON'T CARRY/STORE/CONSUME FOOD, BEVERAGES & TOBACCO PRODUCTS WHERE
THIS MATERIAL IS IN USE.

Exposure Controls

Respiratory Protection:NONE REQUIRED WHERE EXPOSURES APPROVED RESPIRATOR FOR MATERIAL & LEVEL OF EXPOSURE WHERE
EXPOSURES >PELS.
Ventilation:GOOD ENCLOSURE & EXHAUST SHOULD BE PROVIDED TO CONTROL
EXPOSURE WHEN SPRAYING/CURING AT ELEVATED TEMPS.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL SPLASH PROOF GOGGLES/FACESHIELD
Other Protective Equipment:IMPERVIOUS APRON, WORKPANTS, LONG SLEEVE
WORK SHIRT, DISPOSABLE COVERALLS, EYEWASH, SAFETY SHOWER & BARRIER
CREAMS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Chemical Properties

Decomp Temp:Decomp Text:>500F
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID ON BLACK, YELLOW/WHITE CARRIER W/NO
ODOR.
Percent Volatiles by Volume:0-1

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES, OXIDIZING AGENTS, FREE RADICAL INITIATORS, AMINES.
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN.
Conditions to Avoid Polymerization:SUNLIGHT/ULTRAVIOLET LIGHT, HEAT.

Disposal

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.